Ghost Immobiliser Fitting
Guard your vehicle against key theft, cloning, and hacking using the first aftermarket CAN-Immobiliser. The Ghost app and GPS tracking can be linked to the immobiliser to send you alerts when your car is taken or damaged.
Installing an Ghost immobiliser is a breeze for the qualified technician. The right tools, insulation tape, and heat shrink tubing are essential.
Getting Started
In contrast to physical security devices like wheel locks and car alarms, ghost immobilisers safeguard your vehicle without the use of key fobs or LED indicators. They are directly connected to the ECU CAN data network, and are activated only after entering a PIN. This gives a greater level of protection against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a high degree of agility and precision. It's like walking through a minefield. A mistake could result in serious damage to the circuits of your vehicle. It is crucial to know the installation procedure and prepare your vehicle properly.
You'll need to take out interior panels from the vehicle to make space for the immobiliser. Once you've found the ideal location to hide it and secure it using cable ties to prevent it from being removed or tampered with. Then, tidy up the wiring by tying down loose wires and using insulation tape or heat shrink tubing to cover the exposed connections. This reduces the chance of an accidental short circuit, while improving the aesthetics and reducing the chances of theft.
Identify a constant source of 12V power, and a grounding for the ghost immobiliser. Once you've identified these, test the power wires using a multimeter, to ensure they are delivering a consistent voltage. Then, connect the CAN H and CAN L wires from the immobiliser to your chosen power source and the grounding point.
Once you've made all of the necessary connections It is important to check the connections and check the immobiliser for signs of corrosion or other damage. Entering a PIN and starting the vehicle is a great method to test the system. This should become a part of your routine since it allows you to spot any intermittent problems early. Regular testing will also help to prolong the life of the device and ensure it's running at its peak performance.
Preparing your vehicle
Installing a Ghost immobiliser requires expertise and tools. A wiring diagram is necessary to identify the right wires, making precise connections and ensuring security. A multimeter can be used to check electrical values and ensure security. Cable ties and insulation tape can be used to shield the connections from tampering and to keep them neatly secured. Finally, a user manual will give you specific instructions specific to the Ghost Immobiliser model you have.
Once installed the ghost immobiliser will stop unauthorised engine starts by requiring the owner to input a unique PIN code sequence by pressing buttons on the steering wheel or center console. The code can be altered at any time by the vehicle owner, either manually or remotely through an app on mobile. The device is also silent and is undetectable by thieves as it does not emit any radio frequency.
A ghost immobiliser is directly connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals generated by the ECUs and stops the engine from running if the ECU detects a false signal. The system is tamper-proof as well as weatherproof, but it does not have key fobs or LED indicators to attract the attention of thieves.
It can be placed behind the dashboard or in a discreet location, so that it is not visible to thieves and doesn't hinder the vehicle's performance. It can be tucked away in a small container, so it is less likely to be spotted by untrustworthy salespeople during a test drive.
Its discrete operation and integration with the vehicle's CAN bus system makes it a powerful deterrent to the latest methods of car theft, including key cloning and signal relay attacks. Combining the system with other security measures will create a formidable barrier to frustrate even the most persistent thieves. immobiliser ghost and more insurance companies suggest or require ghost immobilisers, as they can reduce monthly premiums.
Making the Connections
Ghost immobilisers are completely silent, unlike traditional security systems, which can be heard by thieves. They prevent thieves from knowing that your car is running. They also prevent high-tech methods of stealing vehicles such as OBD hacking. Installing them without leaving permanent marks on your car is an ideal option for those who intend to sell the car in the near-future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and current solutions to stop car theft. It shuts down your engine by using the CAN data network and generates a unique PIN number, which is difficult for criminals to guess. It can be used in a variety of vehicles and works with many available features, including car alarms GPS trackers, car alarms, steering wheel locks, and door lock bypass systems.
If you decide to install a Ghost immobiliser for your vehicle, make sure you refer to the wiring diagram to determine the wires that connect. Verify their positions to ensure they are exact, and label them or tape them to help you keep track of them. You will also have to locate a consistent power source (12V) for the system as well as an earthing. Once you have all the required components, you can begin making connections to complete the installation.
If the ghost immobiliser is connected to the CAN bus, it will block your vehicle from starting unless you enter a pin number using the buttons on the dashboard or steering wheel. This will stop ECU cloning as well as other methods of vehicle theft. It can also be used with other Thatcham approved security accessories such as alarms or tyre clips to give your vehicle an additional level of protection.
As the UK automotive aftermarket market grows as do the options to secure your vehicle. There are a myriad of ways for thieves to get into your car and steal it, which is why it's crucial to do all you can to stop it from being taken. That's why ghost immobilisers have become an extremely popular option for responsible car owners.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from starting until a specific PIN code is entered. This makes it very difficult for thieves to copy the key fob of your car and start your car, and more difficult to disable the system by hacking into its electronics.
Ghost Immobilisers can also be used in conjunction with GPS tracking devices to help locate your vehicle in the event that it is stolen. This feature is not an option that is commonly used in security products sold by the aftermarket, but it's a great method to enhance your security and provide peace of mind knowing your vehicle is protected.
In addition to offering enhanced security in addition to providing enhanced security, the Ghost-II immobiliser provides a simple user experience by removing the need for additional key fobs and devices. It has a simple, intuitive PIN code entry system that works seamlessly into your daily routine. Additionally, it provides options for deactivation and features that let you temporarily disable the immobiliser for valet parking or for servicing.
Get the tools you require and become familiar with the wiring of your vehicle. A basic set of tools will enable you to create precise connections. A multimeter can be used to verify electrical values. Insulation tape and heat shrink tubing are also crucial for securing connections from short circuits and cable ties can be used to keep the wiring in the right place. Additionally, it is essential to be in a well-lit space and wear the appropriate safety equipment when working with tools and electrical components.
After you've completed the installation you should test the Ghost immobiliser to make sure that it's functioning properly. You should first try to start the car without entering the PIN. If this fails, you'll need to retest the system and perform a more thorough inspection of the connections.
Contrary to other security devices unlike other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is more effective than traditional deterrents such as wheel clamps or steering locks. It is TASSA-approved and recognized by a few insurance companies. This makes it a cost effective investment that gives you the peace of mind you deserve.