Car Ghost Immobiliser
Ghost Immobiliser is a sophisticated system that stops your car from starting without a unique pin code sequence, entered via existing buttons (such as those on the dashboard or on the steering wheel). The device is unnoticeable to thieves and operates quietly.
It can also help in preventing newer methods, such as hotwiring and relay thefts. It may also reduce the cost of insurance.
No Radio Frequencies
Ghost immobilisers differ from a standard one in that it doesn't transmit radio frequencies, making it impossible for thieves to evade the device by using a low-cost key cloning device. Ghost immobilisers prevent your car from starting even when the burglar has copied or taken your key.
Ghost immobilisers are also effective against so-called relay attacks. The signal from your key fob is amplified to trick the system into allowing your car to begin. The Ghost can detect this and will refuse to start your car, and will require you to input the PIN code. This is a great method to stop car thieves who are armed with affordable and easy-to-use tools to duplicate your vehicle.
The Ghost can also be fitted discretely (without causing any damage to your vehicle) and will only be functional when the correct pin sequence has been entered. This will only be known by the owner who has installed it, which means that nobody can use your car without knowing your pin sequence. Certain systems let owners set up a service or valet mode, which allows them to temporarily allow another person to drive the vehicle without divulging their pin code, guarding them against thieves who might steal.
In addition to being user-friendly and easy to dearm, the Ghost can also be connected with a car tracker to make it possible for you to locate your vehicle. Some insurers offer discounts on insurance for vehicles with Ghosts installed. This is an excellent benefit because it improves the security of your vehicle.
Although the Ghost immobiliser is not Thatcham approved, it is an aftermarket item that has been tested by an independent party and found to be effective. If you're thinking about buying a pre-owned car with the Ghost immobiliser fitted, then ask the seller if they're willing to transfer it to the vehicle you are buying. This will ensure that your new vehicle is more secure than it was if the previous owner had not transferred it.
No Circuit Cuts
The absence of circuit cuts means that even if the car has been taken away, thieves will not be able to begin it. They will have to know the sequence of buttons that is used to unlock your vehicle and won't be able to do this if they are not possessing this knowledge. This will deter them them from attempting to steal your vehicle.
If you have an GPS tracking device installed and you are using the Ghost could function as an anti theft device. It can send a signal that will activate a siren to warn the tracker of a theft attempt. This feature can be turned on at any time via your online dashboard.
When you link your Ghost to your CAN data network, it will identify the vehicle and its owner through the unique pin code created at the time of installation. This allows the device communicate with your vehicle's ECU and immobilise the engine. This means that the engine will only be started when it is authorised by the owner of the vehicle or someone with an active PIN code.
The pin code is impossible to be guessed by potential thieves because it is created with buttons that are easily accessible by the driver, such as cruise control and stereo mute. Your engineer will also provide you with an emergency Pin Code override card which is similar to a scratch-off lottery ticket and only requires scratching off to reveal the code and the instructions.
Your Ghost isn't detected by these methods since it doesn't use circuit breakers or radio frequencies. It is therefore unaffected by the new techniques employed by organised gangs who are experts in the use of RF scanning technology and code-grabbing. It is also a lifetime product that can easily be removed from your car when you decide to sell it, meaning you will not lose any of the protection that you have put into.
No Key Fobs
In the UK Vehicle theft is on the rise in the UK. The need for proactive measures to protect your prized vehicles from criminals who are opportunistic. The Autowatch Ghost Immobiliser is an innovative device that provides an extremely robust defense against key hacking, cloning and signals relay attacks. It is a discrete and highly effective security system for cars that is simple to install in a wide range of automobiles.
The Ghost immobiliser is not an ordinary system that relies on key fobs. It also does not use an electronic signal relay. It is not affected by signal interception and cannot be activated with stolen or damaged remotes. It is also tamper-proof and does not have any external wiring, making it difficult to remove or disable.
It protects your joy from hacking, key-longs, and key theft by preventing the engine from starting until you input a unique PIN code. This is achieved by utilising buttons that are already present within the vehicle, such as the ones on the steering wheel, door panels and centre console to create a customisable disarm sequence up to 20 presses (like entering a PIN in your smartphone).
It will only work when you enter the correct pin code. This makes it difficult for opportunistic thieves to steal your car. It is designed to be simple for you to use. If you are concerned about not remembering your pin code and want to know the pin code, ask the installer to supply you with a driver's card that lets you drive the car like you normally.
The absence of key fobs and LED indicators also means that the Ghost immobiliser is not detectable by diagnostic equipment or RF scanners used by thieves to determine the presence of an electronic system. This stealth installation enhances the security of the system and permits it to be installed in a location that is difficult to steal.
Ghost immobilisers are an inexpensive and highly effective deterrent to theft and improve the value of your vehicle. They are also recognised by a few insurance companies and may result in reduced costs.
No Damage
You can be confident that your car will be protected from cloning and hacking as well as key fob theft, in addition to other typical theft methods, if it's equipped with an immobiliser. This is especially crucial if you've spent a an enormous amount of time and money customising your vehicle or own a high-value or unique model. Ghost immobilisers work in a silent manner, leaving no trace of instillation and requires no new components to be fitted.
The system works by using buttons on your steering wheel, center console or door panels. It allows you to create a pin code sequence which must be entered before the engine can begin. The sequence can be modified by you at any time, meaning that even if a thief knows your pin code, they cannot start your vehicle. It is also easy to deactivate the device in an unservice valet mode to allow your car to be driven away for cleaning, servicing or an MOT without being activated.
This means that even if your car is stolen or cloned the thief will not be in a position to start your car and will be caught in the act. The system can also notify you of any manipulation of the wiring in your vehicle, such as signal interception or cutting. This information can be sent to your smartphone so that you are always aware of the security status of your vehicle.
You may want to disable or remove the Ghost Immobiliser due to reasons, like for maintenance or resales. In ghost car immobiliser , you will need to follow a carefully-planned procedure to unplug the device without damaging your vehicle's wiring system. It is highly recommended to wear protective gloves during the procedure, and also use a flashlight to illuminate the dark areas of your vehicle where the immobiliser is likely to be. You can also refer to any documentation you might have like user manuals or installation instructions to pinpoint the exact location of the device.
You can then connect the battery to your vehicle and test it to make sure that the immobiliser functions correctly and all electrical components are working in the way you intended. You will need to use electrical tape or soldering to insulate any wires that have been cut. Make sure there aren't any exposed wires and that any dangling cables are secured using zip ties or some other suitable method. Also, schedule a car inspection with a professional to make sure that the removal process did not damage any other systems in your vehicle.